Mamba AES_ADAT Converter Key Features
- 16 channels from AES/EBU to ADAT
- 16 channels from ADAT to AES/EBU
- Digital to Digital conversion at wire speed
- ADAT light pipe connector for ADAT in and out
- Use standard TosLink cable to your ADAT in or outs
- AES/EBU thru Yamaha DB25 pin out
- Use Yamaha DB25 to XLR AES break out
- Use Yamaha DB25 to Db25 to direct Yamaha
- Use Yamaha - Tascam cross for Tascam AES/EBU
- Order Mamba AES patch bay/break out box
- AES I/O on back and ADAT I/O on the front side
- External WC (word Clock) switch to set Master or Slave
- Operates in 44.1/48K in Slave mode
- Operates in 48K only in Master mode
- EXT WC in on BNC (48K or 44.1K)
- EXT WC out on BNC (48K)
- 2 year Limited warranty [ more info..]
- 1U rack mount box (19"X12"X1.75") @ 9 pounds
- Solid steel and sleek finish
- Future upgrade to 96K for same 16 channel soon
For availability or help with your system setup, call us @ 408 434 9393 or email to This email address is being protected from spambots. You need JavaScript enabled to view it.
Please note that current version works only @ 48K or 44.1K sample rate in slave mode or 48K only in Master mode
Price does not include AES/EBU DB25 break out and ADAT cables.
International customers: Shipping charges would be separate based on your location. You are responsible for any duty and clearance charges. We can ship via USPS for low cost also.
If you need more information or would like to discuss your specific configuration, please email to This email address is being protected from spambots. You need JavaScript enabled to view it. or call us @ 408 434 9393. We would be glad to explain how a Mamba AES_ADAT converter would fit to your application.
Let us know if you have any comments or feedback on this or other products. Your feedback is important and would really be appreciated
AES/EBU DB25 Connectors (DB25):
Compatible with Yamaha AES/EBU pin out
Each DB25 has 4 AES in and 4 AES out (8 ch in and 8 ch out)
Use DB25 to DB25 cross cable for Yamaha Mixer
Use DB25 Yamaha to Tascam cross over to Tascam or Digi Mixer
Use Yamaha DB25 to AES XLR break-out snake
Use Mamba AES/EBU patch bay/break out box 1U
Sturdy and mounted solid on PCB
Secured by pass thru chassis screw
AES/EBU interface on DB25
- TI 74LBC174/175 Line driver and receivers
- 110 ohm terminated per specification
- Pulse AES/EBU transformer isolated
ADAT Light pipe connectors:
Industry standard ADAT connectors
Sturdy and mounted solid on PCB
Secured by pass thru chassis screw
Word Clock IN on BNC
Standard BNC connector (female)
Word Clock input to Mamba ADAT box (48K or 44.1K)
Connect WC out from your equipment (Master)
Clock signal should be max 5V or 3.3VDC TTL levels
Word Clock OUT on BNC
Standard BNC connector (female)
Word Clock output from Mamba ADAT box (48K ONLY)
Connect WC IN to your equipment (for Slave)
Clock signal is 3.3VDC TTL level
ADAT In and Outs
- Compliant to Wavefront Semi ADAT
- Uses ADAT chips from WFS
WC Select Switch
Allows you to select External WC or Int WC
EXT WC position will set the ANADAT Mamba box in slave mode
Make sure the WC IN is connected and your equipment provides a
WC to ANADAT box
If you select INT WC then ANADAT Mamba box will be Master and
you need to connect EXT WC out BNC to your equipment EXT WC IN
(your equipment is Slave)
48K/96K selelct Switch (not used in this version)
select 48/44.1 or 96K operation based on your end equipment
If 44.1/48K then ADAT would be 2 In and 2 Out
If 96K then ADAT would be 4 In and 4 Out (next version)
Warranty:
Two year Limited warranty (WARRANTY INFO)
Power Supply:
Universal power supply AC 90-240V.
Max power consumption: 7W
ON/OFF switch on back
Rack mountable Chassis:
1U (19" [L] X 12" [D] X 1.75" [H])
Solid steel and professional finish
Weight: 9 pounds
Quick Setup Guide of Mamba AES to ADAT is HERE (pdf)
Quick Setup Guide is Here
