Analog & AES to ADAT

Mamba AES_ANA_ADAT Converter Key Features

16 channels from Analog to ADAT & vice versa
16 channels from AES/EBU to ADAT & vice versa
First 16 ADAT channels assigned to AES/EBU
second 16 ADAT channels assigned to Analog
Line Level Analog In and out
High quality Analog to Digital converters from AKM Semi
Max analog input level is +18 dBu
Latency ~600 usec @ 48/44.1K (analog to ADAT)
Latency ~100 usec for AES/EBU to ADAT
AES/EBU DB25 compliant to Yamaha digital AES pinout
Use Yamaha DB25 cross cable for direct Yamaha AES
Use DB25 to AES breakout cables (Yamaha pin out)
Use Yamaha to Tascam cross cable for Tascam DB25
ADAT compliant to industry standard
Uses light pipe connectors with TosLink cables
External WC (word Clock) switch to set Master or Slave
44.1k ONLY when Mamba is slave (EXT WC IN @ BNC)
48 K Mamba mode Master or Slave
Analog in and out via DB25 (Tascam analog pin out)
Use DB25 to XLR breakout cables to connect to XLRs
Use DB25 to DB25 cable to connect to Tascam DB25
EXT WC in on BNC (44.1/48K )
EXT WC out on BNC (48K ONLY)
2 year Limited warranty [ more info..]
1U rack mount box (19"X12"X1.75") @ 9 pounds
Solid steel and sleek finish

Analog Input:
Maximum input level = +18 dBu
SNR=105 dB
THD+N (1kHz @ -1dBFS) = 0.005% (@48K)
Noise floor = - 87 dBu
Input impedance = 4.53 Kohm

Analog output:
Maximum output level = +18 dBu
SNR = 114.6 dB
THD+N (1kHz @ -1dBFS) =0.0048% (@48K)
Noise floor = - 96 dBu
Output impedance = 100 ohm

Analog DB25 connectors:
Compliant to Tascam/Digi Analog DB25 pin out
Use Db25 to XLR or TRS break out cables
Order Mamba XDB - XLR to Db25 breakout boxes

Word Clock IN on BNC
Standard BNC connector (female)
Word Clock input to Mamba box
Connect WC out from your equipment (Master)
Clock signal should be max 5V or 3.3VDC TTL levels

Word Clock OUT on BNC
Standard BNC connector (female)
Word Clock output from Mamba box
Connect WC IN to your equipment (for Slave)
Clock signal is 3.3VDC TTL level

WC Select Switch
Allows you to select External WC or Int WC
EXT WC position will set the Mamba box in slave mode
Make sure the WC IN is connected and your box provides a WC to Mamba box
If you select INT WC then Mamba box will be Master and you need to connect
EXT WC out BNC to your equipment EXT WC IN (your equipment is Slave)

44.1K / 48K operation:
44.1/48K operation when Mamba is slvae (WC IN on BNC)
48K only when Mamba is Master (WC out on BNC)
Slave mode is automatic with 44.1/48K. Make sure the WC in proper
freq for smooth operation

AES/EBU DB25 Connectors (DB25):
Compatible with Yamaha AES/EBU pin out
Each DB25 has 4 AES in and 4 AES out (8 ch in and 8 ch out)
Use DB25 to DB25 cross cable for Yamaha Mixer
Use DB25 Yamaha to Tascam cross over to Tascam or Digi Mixer
Use Db25 to AES XLR break-out snake
Sturdy and mounted solid on PCB
Secured by pass thru chassis screw

AES/EBU interface on DB25
- TI 74LBC174/175 Line driver and receivers
- 110 ohm terminated per specification
- Pulse AES/EBU transformer isolated

ADAT Light pipe connectors:
Industry standard ADAT connectors
Sturdy and mounted solid on PCB
Secured by pass thru chassis screw
Uses TosLink cables

Warranty:
Two year Limited warranty (WARRANTY INFO)

Power Supply:
Universal power supply AC 90-240V.
Max power consumption: 12W
ON/OFF switch on back

Rack mountable Chassis:
1U (19" [L] X 12" [D] X 1.75" [H])
Solid steel and professional finish
Weight: 9 pounds

Analog & AES/EBU to ADAT (32) converter setup HERE

Coming soon!

"oh sorry, i forgot to answer, yes, everything is and working, thanks again", Jens Peter Schalow

Discontinued

mamba analog & aes/ebu to ADAT converter